REZULTATE CAUTARE :: L-LTE EC21E - SHIELD LTE CAT1 [4G] + GNSS, VERSIUNE UFL

Modulele l-LTE (CAT1 - optimizat IoT) sunt compatibile Arduino, BeagleBone si Raspberry PI si ofera conectivitate 4G, 3G si GSM-GPRS. In acelasi shield se afla integrat si un receptor GNSS (GPS+ GLONASS) de inalta performata si sensibilitate.

Specificatii shield l-LTE v 1.07 by itbrainpower.net, CAT1 European uFL

• suporta transmisie 4G [LTE CAT1]/3G/2G - GSM/GPRS/SMS,
  
• viteza transfer: LTE-FDD Max 10Mbps (DL) Max 5Mbps (UL),
  
• benzi frecventa 4G, 3G si GSM: FDD LTE B1/B3/B5/B7/B8/B20, WCDMA B1/B5/B8 si GSM B3/B8,
  
• receptor multi-constelatie GPS si GLONASS integrat,
  
• conector 4G/3G/GSM - uFL, GNSS - uFL,
  
• suporta SIM - USIM standard size [2FF],
  
• on board control (switch): ON/OFF & RESET MODEM,
  
• interfata mini USB B -drivere Windows, Linux, RPI,
  
• interfate digitale: ON/OFF, RESET si MODEM STATUS compatibilitate 3-5V,
  
• Interfata seriala TX si RX compatibilitate 3-5V,
  
• compatibil ARDUINO si Raspberry PI,
  
• charger acumulator LiPo integrat,
  
• tensiune de alimentare: DC 5V(necesita acumulator LiPo),
  
• tensiune de alimentare secundara: DC 4V (fara acumulator LiPo),
  
• dimensiuni: 34.29 x 49.02mm.
  

Compatibilitate retele Romania: Orange, Vodafone si Telekom; partial Digi Mobil

Documentatie:
datasheet l-LTE v1.07
Ghid utilizare

Optiuni comerciale:
l-LTE v 1.07 by itbrainpower.net, CAT1 (IoT optimized) European SMA
l-LTE v 1.07 by itbrainpower.net, CAT4 (high speed LTE) European uFL
l-LTE v 1.07 by itbrainpower.net, CAT4 (high speed LTE) European SMA

Proiectat si fabricat in Romania

SKU: ITBP-2010

modem 4G LTE CAT1 SHIELD, compatibil ARDUINO si Raspberry PI

Livrare din stoc.

Inapoi la listare taAdauga in cos Finalizare comanda